model ordering code : cml 325 xxx led dispay panel assembly lens pcb rng 268 retainer rng 268 4-23-10 cml 325 xxx d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 4-23-10 smu dz low profile lens visual communications company, inc. any break all corners and sharp prohibited. drawn: checked: title: b dwg. no. scale: 1:1 rev do not scale drawing size material proprietary and confidential third angle projection the information contained in this visual communications company, inc is phone (760) 560-1300 fax (760) 560- 1301 emai l vccsales@vcclite.com date finish visual communications company, inc. 190 bosstick boulevard, suite101 san marcos, ca 92069 usa approval drawing is the sole property of edges .030 max without the written permission of reproduction in part or as a whole sheet 1 of 1 1 unless otherwise specified dimensions are in inches: angles decimals 1' . x .020 .xx .010 finish .xxx .005 5mm round fresnel 001 assembly: insert lens through panel hole, s lide rng 268 retainer on back of lens. pcb revised per ecr111009az01 chamfered. 4-23-10 see notes retainer (order separately) smu panel thickness .031 [0.8mm] to .250 [6. 35mm]. panel hole should be deburred, but not 2. 3. polycarbonate, u.s. & foreign pat. issued & pend. mounted leds slide into lens when the panel cover is closed or the pcb card is inserted into 4. material: polycarbonate, ul 94-v2 the case. ul 94-v2 notes: mounting: mounts in a .281 .002 [ 7.13mm .05] panel hole on .375 [9.5mm] centers. 1. revisions ecn# rev. description date initials 001 lens color ctp clear transparent 1.78mm .070 11.58mm .456 .300 7.62mm .281 7.14mm .125 3.18mm
|
